


Bloom v2 v1.1.0
Bloom v2 v1.1.0 is a “day 1” firmare update for our fractal sequencer. It includes some polishing of existing features, as well as adds a new Branch Regeneration Filter to Narwhal.
How To Update:
Download the .bin firmware file above.
Place the .bin file onto Bloom v2’s USB drive (MacOS users: do not unzip the .bin file, simply place it onto the USB drive).
Eject the USB drive, and place it back into Bloom v2.
If Bloom v2 is off, boot up the module to automatically begin the firmware update.
If Bloom v2 is on, hold the Shift, Reseed, and Reset buttons for 3 seconds to initiate the firmware update. The module will update without needing to power cycle.
Changelog:
fixed issue with the Page Increment Narwhal setting options were opposite of their functions
added “Regenerate Branches Filter” to Narwhal settings (this setting only works with v1.1.0 or later)
various UX and UI polishes
Bloom v2 v1.1.0 is a “day 1” firmare update for our fractal sequencer. It includes some polishing of existing features, as well as adds a new Branch Regeneration Filter to Narwhal.
How To Update:
Download the .bin firmware file above.
Place the .bin file onto Bloom v2’s USB drive (MacOS users: do not unzip the .bin file, simply place it onto the USB drive).
Eject the USB drive, and place it back into Bloom v2.
If Bloom v2 is off, boot up the module to automatically begin the firmware update.
If Bloom v2 is on, hold the Shift, Reseed, and Reset buttons for 3 seconds to initiate the firmware update. The module will update without needing to power cycle.
Changelog:
fixed issue with the Page Increment Narwhal setting options were opposite of their functions
added “Regenerate Branches Filter” to Narwhal settings (this setting only works with v1.1.0 or later)
various UX and UI polishes
Bloom v2 v1.1.0 is a “day 1” firmare update for our fractal sequencer. It includes some polishing of existing features, as well as adds a new Branch Regeneration Filter to Narwhal.
How To Update:
Download the .bin firmware file above.
Place the .bin file onto Bloom v2’s USB drive (MacOS users: do not unzip the .bin file, simply place it onto the USB drive).
Eject the USB drive, and place it back into Bloom v2.
If Bloom v2 is off, boot up the module to automatically begin the firmware update.
If Bloom v2 is on, hold the Shift, Reseed, and Reset buttons for 3 seconds to initiate the firmware update. The module will update without needing to power cycle.
Changelog:
fixed issue with the Page Increment Narwhal setting options were opposite of their functions
added “Regenerate Branches Filter” to Narwhal settings (this setting only works with v1.1.0 or later)
various UX and UI polishes